Mazda 2010 CX-9 Owner's Manual page 191

CX-9_8AU2-EA-09G_Edition1 Page191
Wednesday, July 8 2009 12:7 AM
To increase speed using accelerator
pedal
Depress the accelerator pedal to accelerate
to the desired speed.
Press down or press up on the cruise
control SET /SET - switch and release
it immediately.
NOTE
Accelerate if you want to speed up temporarily
when the cruise control is on. Greater speed
will not interfere with or change the set speed.
Take your foot off the accelerator to return to
the set speed.
qTo Decrease Cruising Speed
Press down the cruise control SET -
switch and hold it. The vehicle will
gradually slow.
Release the switch at the speed you want.
Form No.8AU2-EA-09G
Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET -
switch. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.
qTo Resume Cruising Speed at
If some other method besides the OFF
switch was used to cancel cruising speed
(such as applying the brake pedal) and the
Cruise control
system is still activated, the most recent
switch
set speed will automatically resume when
the RES switch is pressed.
If vehicle speed is below 30 km/h (19
mph), increase the vehicle speed up to 30
km/h (19 mph) or more and press the RES
switch.
qTo Cancel
To cancel the system, use one of these
methods:
l
Cruise control
l
switch
Black plate (191,1)
Starting and Driving
More Than 30 km/h (19 mph)
Press the OFF switch.
Slightly depress the brake pedal.
Driving Your Mazda
5-21