Mazda 2002 Protege Owner's Manual page 61

J39L(02MY).book Page 5 Thursday, November 1, 2001 10:49 AM
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and gently pry open the transmitter.
Slot
2. Press the portion of the battery
indicated by A and remove the battery.
Form No. 8Q36-EA-01F
3. Install a new battery (CR2025 or the
equivalent) into the front portion of the
holder with the positive pole ( )
facing up. Press on the B portion of the
battery to set the battery.
Back cover
Front
cover
Do not press any buttons when
replacing the battery. The electronic
code could be altered and cause the
A
keyless entry system to malfunction.
If the keyless entry system fails to
operate, contact an Authorized Mazda
Dealer.
4. Align the front and back covers and
snap the transmitter shut.
Knowing Your Mazda
Doors and Locks
B
CAUTION
Back cover
Front of
holder
3-5