Mazda 2002 Protege Owner's Manual page 216

J39L(02MY).book Page 24 Thursday, November 1, 2001 10:49 AM
Maintenance and Care
Owner Maintenance
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse older of removal.
Tab
NOTE
Install the blade so that the tabs are
toward the bottom of the wiper arm.
M Replacing Rear Window Wiper
Blade (Hatchback)
When the wiper no longer cleans well, the
blade is probably worn or cracked.
Replace it.
CAUTION
To prevent damage to the wiper arm
and other components, don't move the
wiper by hand.
8-24
Form No. 8Q36-EA-01F
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Push
Plastic locking clip
CAUTION
To prevent damage to the rear window,
don't let the wiper arm fall on it.
2. Pull down the blade rubber and slide it
out of the blade holder.
Pull out