Mazda 2002 Protege Owner's Manual page 152

J39L(02MY).book Page 20 Thursday, November 1, 2001 10:49 AM
Interior Comfort
Audio System
M Clock
Setting the time
The clock can be set at any time when the
ignition switch is in the ACC or ON
position.
1. To adjust the time, press the clock
button ( ) for about 2 seconds
until a beep is heard.
The clock's current time will flash.
2. To advance the hours, press the hour
set button ( ). To advance the minutes,
press the minute set button ( ) while
the time is flashing.
3. Press the clock button (
to start the clock.
6-20
Form No. 8Q36-EA-01F
Display Clock button
Exact hour adjustment
1. To set the exact hour, press the clock
button (
until a beep is heard.
The clock's current time will flash.
2. Press the clock button (
and the time will be adjusted as
follows:
(Example)
12:01—12:29→12:00
12:30—12:59→1:00
NOTE
) again
If the power supply to the unit is
interrupted (if the fuse blows or the
vehicle's battery is disconnected), the
clock will need to be reset.
Hour set
button
Minute set
button
) for about 2 seconds
) again