Mazda 2002 MPV Owner's Manual page 266

J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM
Maintenance and Care
Owner Maintenance
If the headlights or other electrical
components don't work and the fuses in
the cabin are OK, inspect the fuse block
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Tab
3. If a fuse is blown, replace it with a new
one of the same rating.
Normal
8-34
Form No. 8Q44-EA-01K
When replacing the 120A fuse:
1. Turn off the ignition switch.
2. Remove the negative battery terminal.
3. Remove the A nuts.
4. Lift the fuse block and remove the B
A
5. Replace the fuse with a new one of the
Fuse block cover
6. Install in the reverse order of removal.
Blown
bolts.
120A fuse
B
same rating.
B
A