Mazda 2002 MPV Owner's Manual page 182

J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM
Interior Comfort
Audio System
M Clock
Setting the time
The clock can be set at any time when the
ignition switch is in the ACC or ON
position.
1. To adjust the time, press the clock
button ( ) for about 2 seconds
until a beep is heard.
The clock's current time will flash.
2. To advance the hours, press the hour
set button ( ). To advance the
minutes, press the minute set button
( ) while the time is flashing.
3. Press the clock button (
to start the clock.
6-24
Form No. 8Q44-EA-01K
Display
Exact hour adjustment
1. To set the exact hour, press the clock
button (
until a beep is heard.
The clock's current time will flash.
2. Press the clock button (
and the time will be adjusted as
follows:
(Example)
12:01—12:29→12:00
12:30—12:59→1:00
NOTE
) again
If the power supply to the unit is
interrupted (if the fuse blows or the
vehicle's battery is disconnected), the
clock will need to be reset.
Clock button
Hour set
button
Minute set
button
) for about 2 seconds
) again