Fan Speed; Manual Override Controls - Lincoln 1998 Navigator Owner's Manual

Controls and features

Fan speed (

)
When AUTOMATIC is pressed, fan
speed is adjusted automatically for
HI
existing conditions. You can override
OFF
fan speed at any time. To control
fan speed manually, use the
AUTOMATIC
thumbwheel or steering wheel
control to cancel automatic fan
speed operation. Rotate the
FLR • DEF DEF
LO
thumbwheel up for higher fan speed
or down for lower fan speed. Press
the steering wheel control up for
higher fan speed or down for lower
fan speed.
The display will show to indicate
F
˚
manual fan operation.
AUTO
To return to automatic fan operation, press AUTOMATIC.

Manual override controls

The override controls are located at
HI
the bottom of the EATC and allow OFF
F
AUTO
you to determine where airflow is
OUTSIDE TEMP AUTOMATIC
directed. To return to full automatic
MAX A/C VENT PNL • FLR FLOOR FLR • DEF DEF
LO
control, press AUTOMATIC.
The air conditioning compressor will operate in all modes except FLOOR
and VENT. It will also operate only when required when AUTOMATIC
has been selected. However, the air conditioning will only function if the
outside temperature is about 10°C (50°F) or above.
Since the air conditioner removes considerable moisture from the air
during operation, it is normal if clear water drips on the ground under
the air conditioner drain while the system is working and even after you
have stopped the vehicle.
24