GMC 2007 Sierra 1500 Pickup Owner's Manual page 587

To store the jack and jack tools, do the following:
A. Wing Nut
B. Wheel Blocks
C. Retaining
Bracket and
Wing Nut
D. Wheel Wrench
and Extensions
E. Tool Bag
F. Mounting Bracket
G. Jack
H. Retaining Hook
1. Put the tools (D) in the tool bag (E) and place
them in the retaining bracket (C).
2. Tighten down the wing nut (C).
3. Assemble the wheel blocks (B) and jack (G)
together with the wing nut (A) and
retaining hook (H).
4. Position the jack (G) in the mounting
bracket (F). Position the holes in the base of
the jack (G) onto the pin in the mounting
bracket (F).
5. Return them to their original location in the
vehicle. For more information, refer to
Removing the Spare Tire and Tools on
page 566 for more information.
587