GMC 2007 Sierra 1500 Pickup Owner's Manual page 312

1 PREV (Previous): The tape must have at least
three seconds of silence between each selection
for previous to work. Press this pushbutton to go
to the previous selection on the tape if the
current selection has been playing for less than
three seconds. If pressed when the current
selection has been playing from three to
13 seconds, it will go to the beginning of the
previous selection or the beginning of the current
selection, depending on the position on the
tape. If pressed when the current selection has
been playing for more than 13 seconds, it will go to
the beginning of the current selection.
SEEK and a negative number will appear on the
display while the cassette player is in the previous
mode. Pressing this pushbutton multiple times
will increase the number of selections to be
searched back, up to 9.
2 NEXT: The tape must have at least
three seconds of silence between each selection
for next to work. Press this pushbutton to go
to the next selection on the tape. Pressing this
pushbutton multiple times, in next mode, will
increase the number of selections to be searched
forward. SEEK and a positive number will
appear on the display.
312
3 REV (Reverse): Press this pushbutton to
quickly reverse the tape. The radio will play while
the tape reverses. Press it again to return to
playing speed. The station frequency and REV will
appear on the display. Select stations during
reverse operation by using TUNE and SEEK.
4 FWD (Forward): Press this pushbutton
to quickly advance the tape. The radio will play
while the tape advances. Press this pushbutton
again to return to playing speed. The station
frequency and FWD will appear on the display.
Select stations during forward operation by using
TUNE and SEEK.
X
5 SIDE: Press this pushbutton to play the
other side of the tape.
© ¨
SEEK : The right arrow is the same as the
NEXT pushbutton, and the left arrow is the
same as the PREV pushbutton. If either arrow is
held or pressed more than once, the player
will continue moving forward or backward through
the tape. SEEK and a positive or negative
number will appear on the display.