Wheel Alignment And Tire Balance; Wheel Replacement - GMC 2003 Safari Owner's Manual

Hide thumbs Also See for 2003 Safari:
Table of Contents

Advertisement

Wheel Alignment and Tire Balance
If you need to replace any of your wheels, wheel
bolts
or wheel nuts, replace them only with new GM
The wheels on your vehicle were aligned and balanced
original equipment parts. This way, you will be sure to
carefully at the factory to give you the longest tire life
have the right wheel, wheel bolts and wheel nuts for
and best overall performance.
your vehicle.
Scheduled wheel alignment and wheel balancing are
not needed. However, if you notice unusual tire wear or
your vehicle pulling one way or the other, the alignment
may need to be reset. If you notice your vehicle
vibrating when driving on a smooth road, your wheels
may need to be rebalanced.
,"/heel Replacement
Replace any wheel that is bent, cracked or badly
rusted or corroded. If wheel nuts keep coming loose,
the wheel, wheel bolts and wheel nuts should be
replaced. If the wheel leaks air, replace it (except some
aluminum wheels, which can sometimes be repaired).
See your dealer if any of these conditions exist.
Your dealer will know the kind of wheel you need.
Each new wheel should have the same load-carrying
capacity, diameter, width, offset and be mounted
the same way as the one it replaces.
Using the wrc,,d replacement wheels, wheel
bolts or wheel nuts on your vehicle can be
dangerous. It could affect the braking and
handling of your vehicle, make your tires lose
air and make you lose control. You could have
a collision in which you or others could be
injured. Always use the correct wheel, wheel
bolts and wheel nuts for replacement.
Notice: The wrong wheel can also cause problems
with bearing life, brake cooling, speedometer or
odometer calibration, headlamp aim, bumper height,
vehicle ground clearance and tire or tire chain
clearance to the body and chassis.
See Changing a Flat Tire on page 5-71 for more
information.
5-69

Advertisement

Table of Contents
loading

Table of Contents