GMC 2003 Safari Owner's Manual page 120

4. Center the garage door opener activation button
over the console door button and press the opener
firmly into place.
The pegs inside the
compartment door are
used to make sure
the button on the
compartment door will
contact the control
button on the garage
door opener.
6. Now, with the
compartment door
closed, press the
button again to
make sure the
garage door opener
operates properly.
With the garage door opener positioned properly and
the right number of pegs in place, you can press
the button to operate the opener.
Your vehicle may be equipped with a HomeLink@
5. Add one peg at a time until the garage door opener Transmitter. For more information, see HomeLinP
operates with the compartment door closed when Transmitter on page 2-34.
you press the button. Adjust the position of the
garage door opener and add or remove pegs
as needed, until the opener operates properly.
2-41