GMC 2003 Safari Owner's Manual page 133

Windshield Wipers For fewer wipes choose a setting closer to LOW.
Use this setting for light rain and snow.
To operate the windshield
wipers turn the band,
located
On
the multifunction
carefully loosen or thaw them.
If your blades do become
lever,
Or
downward* worn or damaged, get new blades or blade inserts.
- -
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
Windshield Washer
(Washer Fluid): There is a paddle marked with the
windshield washer symbol at the top of the multifunction
lever. To spray washer fluid on the windshield, press
the paddle. The wipers will clear the window and
then either stop or return to your preset speed.
MIST: Turn the band to MIST for a single wiping cycle.
Hold it there until the windshield wipers start, then let
it go. The wipers will stop after one wipe. If you
want more wipes, hold the band on mist longer.
OFF: Turn the band to turn off the windshield wipers.
LOW (Low Speed): Turn the band to LOW for
steady wiping at low speed.
HIGH (High Speed): Turn the band to HIGH for
steady wiping at high speed.
DELAY: Turn the band to one of the five delay
settings located between OFF and LOW, to choose
the delayed wiping cycle. The closer the band is
turned to OFF, the shorter the delay will be.
L - heezing weatl---,
-
~ s e your washer
until the windshield is warmed. Otherwise the
washer fluid can form ice on the windshield,
blocking your vision.
The wipers will clear the window and then either stop or
return to your preset speed.
3-8