Zone map
2. Press and hold the "MODE" button until the
"VAR" indicator appears in the display
(approximately 4 seconds).
3. Release the "MODE" button. The display
will now show the current zone number that
is stored in the compass.
4. Press the "MODE" button repeatedly (or
press and hold in) until the desired zone
number appears in the display (once it
reaches 15, the next press of the button will
set it to 1).
5. Release the "MODE" button when the
desired zone number is displayed.
After approximately three seconds the display
will flash all segments and then return to normal
operation. Zone is now updated.
144