CS1842 / CS1844 User Manual
Restore Default Settings
To reset the CS1842 / CS1844 to its default Hotkey settings, do the following:
1. Invoke HSM (see page 24).
2. Press [R] [Enter].
All Hotkey settings return to the factory default settings.
Power on Detection
With Power on Detection, if the focus computer is powered off, the switch will
automatically switch to the next powered-on computer. Power on Detection
can be enabled or disabled. The default setting is enabled. To enable/disable
Power on Detection, do the following:
1. Invoke HSM (see page 24).
2. Press [E].
Alternative Manual Port Selection Settings
To toggle between the default and the alternative front panel pushbutton
manual port selection settings, do the following:
1. Invoke HSM (see page 24).
2. Press [S].
See Alternative Manual Port Selection Settings, page 19, for full details of the
alternative front panel pushbutton manual port selection settings.
Keyboard Emulation Control
To enable/disable keyboard emulation, do the following:
1. Invoke HSM (see page 24
2. Press [N].
Mouse Emulation Control
To enable/disable mouse emulation, do the following:
1. Invoke HSM (see page 24
2. Press [M].
28
).
).