Nvidia MCP 78S User Manual page 58

4 = func#4, IPL device initialization on the BUS concerned.
5 = func#5, general device initialization on the BUS concerned.
6 = func#6, error reporting for the BUS concerned.
7 = func#7, add-on ROM initialization for all BUSes.
8 = func#8, BBS ROM initialization for all BUSes.
The lower nibble 'Y' indicates the BUS on which the different routines are being
executed. 'Y' can be from 0 to 5.
0 = Generic DIM (Device Initialization Manager).
1 = On-board System devices.
2 = ISA devices.
3 = EISA devices.
4 = ISA PnP devices.
5 = PCI devices.
ACPI Runtime Checkpoints
ACPI checkpoints are displayed when an ACPI capable operating system either enters
or leaves a sleep state. The following table describes the type of checkpoints that
may occur during ACPI sleep or wake events
Checkpoint
AC
AA
01,02,03,04,05
10,20,30,40,50
* The above list is for reference use only.
First ASL check point. Indicates the system is running in ACPI mode.
System is running in APIC mode.
Entering sleep state S1, S2, S3, S4, or S5.
Waking from sleep state S1, S2, S3, S4, or S5.
:
Description
54