Back-Up Lamps (Coupe) - Chevrolet 2009 Cobalt Owner's Manual

12. Push the wiring harness straight into the taillamp
assembly and push the tab down.
13. Reinstall the outer two screws into the taillamp
assembly.
14. Reinstall the trunk trim and the fasteners.

Back-Up Lamps (Coupe)

To replace a back-up lamp bulb:
1. Open the trunk. See Trunk on page 2-12.
2. Locate the back-up lamp bulb assembly in the
trunk lid.
3. Turn the bulb socket counterclockwise and pull it
out of the lamp assembly.
On vehicles that have a back-up lamp cover, first
remove it by pressing the tab at the top.
4. Pull the old bulb straight out of the bulb socket.
5. Push the new bulb straight into the bulb socket until
it clicks.
6. Push the bulb socket into the lamp assembly and
turn it clockwise to lock it into place.
5-51