How To Inspect The Engine Air Cleaner/Filter - Chevrolet 2008 Equinox Owner's Manual

Hide thumbs Also See for 2008 Equinox:
Table of Contents

Advertisement

How to Inspect the Engine Air
Cleaner/Filter
To inspect the air cleaner/filter remove the filter from the
vehicle and lightly shake the filter to release loose dust
and dirt. If the filter remains caked with dirt, a new filter is
required.
To inspect or replace the engine air cleaner/filter, do the
following:
1. Turn off the engine.
2. Disconnect the air flow sensor electrical connector.
5-20
3. Loosen the screws on the clamps holding the air
outlet duct in place. Do not pry the clamps off.
4. Remove the air outlet duct.
5. Undo the clamps on the filter cover. To remove the
cover, pull up on the front and then pull the
cover out.
6. Inspect or replace the engine air cleaner/filter.
Wipe all dust from inside of the housing and inspect
the air cleaner and air outlet duct for cracks, cuts,
and deterioration. The air outlet duct must be
replaced if damaged.
7. Reinstall the filter cover and latch the clamps.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents