With Date Display - Chevrolet 2008 Equinox Owner's Manual

With Date Display

Single CD (MP3) or a Single CD and
DVD (MP3) Player
H
These radios have a
the time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
H
2. Press the button and the HR, MIN, MM,
DD, YYYY (hour, minute, month, day, and
year) displays.
3. Press the pushbutton located under any one of
the labels that you want to change. Every time
the pushbutton is pressed again, the time or
the date if selected, increases by one.
•
Another way to increase the time or date,
is to press the right SEEK arrow or
(forward) button.
•
To decrease, press the left SEEK arrow or
s REV (reverse) button. You can also
f
turn the (tune) knob, located on the upper
right side of the radio, to adjust the selected
setting.
3-66
(clock) button for setting
\ FWD
The date does not automatically display. To see the
H
date press the (clock) button while the radio is
on. The date with display times out after a few seconds
and goes back to the normal radio and time display.
To change the time default setting from 12 hour to
H
24 hour, press the button and then the pushbutton
located under the forward arrow label. Once the
time 12H and 24H are displayed, press the pushbutton
located under the desired option to select the default.
H
Press the button again to apply the selected default,
or let the screen time out.
Radio with Six-Disc CD (MP3)
This type of radio has a MENU button instead of
H
the button to set the time and date.
To set the time and date, follow these instructions:
1. Turn the ignition key to ACC/ACCESSORY
or ON/RUN. Press the
center of the radio, to turn the radio on.
2. Press the MENU button. Once the clock option
is displayed.
3. Press the pushbutton located under that label.
The HR, MIN, MM, DD, YYYY displays.
O knob, located in the