Rear Seat Armrest - Chevrolet 2008 Equinox Owner's Manual

To use the panel in the center position, do the
following:
1. Insert the front corners of the panel into the
middle guides.
2. Slide the panel forward.
3. Press down and pull rearward on the back
of the panel to lock it in place.
The panel can be used in this position when you have
to place a flat or spare tire in the rear cargo area.
To use the panel in the upper position, do the
following:
1. Insert the front corners of the panel into the
top guides.
2. Slide the panel forward.
3. Press down and pull rearward on the back
of the panel to lock it in place.
This can be used as a cargo cover for the rear area.
The panel may be installed either carpet or plastic
side up. The panel may also be used as a table
in this position. See Table on page 2-48 for more
information.

Rear Seat Armrest

Your vehicle may have a rear seat armrest that
contains two cupholders. To access the cupholders,
pull the armrest down from the rear seatback.
2-47