License Plate Lamp; Replacement Bulbs - Chevrolet 2008 Colorado Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Reach under the rear bumper for the bulb socket.
2. Turn the bulb socket counterclockwise and pull
the bulb socket out of the connector.
3. Pull the old bulb straight out from the bulb socket.
4. Push the new bulb straight in until it clicks to
secure it.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
5-56

Replacement Bulbs

Exterior Lamp
Center High-Mounted
Stoplamp (CHMSL)
License Plate Bulb
Headlamps
High-beam
Low-beam/Daytime Running
Lamp (DRL)
Parking/Front Turn Signal
Parking Lamp (Inboard)
Stoplamp, Rear Turn Signal,
Taillamp, and Back-up Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
912
W5W
9005
9006
3757KA
3157A
3057