Table of Contents
Advertisement
ACPI Suspend Type
This item will set which ACPI suspend type will be used.
Power Management
This category allows you to select the type (or degree) of power
saving and is directly related to the following modes:
1.
2.
There are three selections for Power Management, two of which have fixed
mode settings.
Min. Power Saving
Max. Power Saving
User Defined (default)
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS (default)
Suspend Mode
HDD Power Down
Minimum power management. Suspend Mode = 1
hr., and HDD Power Down = 15 min.
Maximum power management — Suspend
Mode = 1 min., and HDD Power Down = 1 min.
Allows you to set each mode individually.
When not disabled, each of the ranges are from
1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management signaling.
3-21
®
Advertisement
Table of Contents
