Table of Contents
Advertisement
CPU Internal Cache
The default value is Enabled.
Enabled (default)
Disabled
Note: The internal cache is built in the processor.
External Cache
Choose Enabled or Disabled. This option enables the level 2 cache
memory.
CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the level 2 cache
memory ECC(error check correction).
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power
on the computer. If this is set to Enabled, BIOS will shorten or skip some
check items during POST.
Enabled
Disabled (default)
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in
the sequence selected in these items. The settings are Floppy, LS/ZIP, HDD-
0/HDD-1/HDD-2/HDD-3, SCSI, CDROM, LAN, and Disabled.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A and
B. Default is Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is
40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80
tracks.
Enable cache
Disable cache
Enable quick POST
Normal POST
3-9
®
Advertisement
Table of Contents
