MSI MS-5187 User Manual page 84

CHAPTER 4
3.4 Enable the Ultra DMA for IDE Driver:
Step 1: Insert the provided CD-ROM disk into the CD-ROM drive.
Step 2: Look for the CD-ROM drive, double click on the CD-ROM icon.
This will show the setup screen.
Step 3: Click on the "VIA Chipset Drivers" icon and the screen will show
"VIA Service Pack 4.05".
Step 4: Click "Next" and the screen will show three drivers: "Bus Master
PCI IDE Drivers", "AGP VxD Drivers" and "VIA Chipset Function's
Registry". Select the "Bus Master PCI IDE Drivers" icon and click
"Next".
Step 5: The setup program will request you to choose "Install", "Uninstall"
or "Enable/Disable (Ultra) DMA for IDE driver". Please select
"Enable/Disable (Ultra) DMA for IDE driver" and click "Next" to
continue.
Step 6: The setup program will show the hard drive DMA mode, please
click "Next".
Step 7: The setup program will request you to choose whether to restart
the computer or not. Please select "Yes, I want to restart my
computer now" and click Finish. The computer will restart and
finish the (Ultra) DMA Enable for IDE Master.
VIA CHIPSET DRIVER
4-8