MSI MS-5187 User Manual page 81

CHAPTER 4
2.5 Enable the Ultra DMA Driver for IDE Driver
Step 1: Insert the provided CD-ROM disk into the CD-ROM drive.
Step 2: Look for the CD-ROM drive, double click on the CD-ROM
icon. This will show the setup screen.
Step 3: Click on the "VIA Chipset Drivers" icon and the screen will
show "VIA Service Pack 4.05".
Step 4: Click "Next" and the screen will show three drivers: "Bus
Master PCI IDE Drivers", "AGP VxD Drivers" and "VIA
Chipset Function's Registry". Select the "Bus Master PCI
IDE Drivers" icon and click "Next".
Step 5: The setup program will request you to choose "Install",
"Uninstall" or "Enable/Disable (Ultra) DMA for IDE driver".
Please select "Enable/Disable (Ultra) DMA for IDE driver"
and click "Next" to continue.
Step 6: The setup program will show the hard drive DMA mode,
please click "Next".
Step 7: The setup program will request you to choose whether to
restart the computer or not. Please select "Yes, I want to
restart my computer now" and click Finish. The computer
will restart and finish the (Ultra) DMA Enable for IDE
Master.
VIA CHIPSET DRIVER
4-5