Table of Contents
Advertisement
CHAPTER 4
3. Windows
Install Windows
installing the VIA drivers.
Insert the CD-title in the CD-ROM drive. The CD will auto-run and
will display four icons on the screen "VIA Chipset Drivers", "VIA
AC97 PCI Sound Drivers", "VIA Enhance VGA Drivers" and
"Download VIA Drivers". In order to install the drivers properly,
install the "VIA Chip Drivers" first and then install the "VIA AC97
PCI Sound Drivers" or "VIA Enhance VGA Drivers".
3.1 VIA Chipset Drivers Installation Procedure:
Step 1: Insert the provided CD_ROM disk into the CD-ROM drive.
Step 2: Look for the CD_ROM drive, double click on the CD_ROM
icon. This will show the setup screen.
Step 3: Click on "VIA Chipset Drivers" icon and the screen will
show "VIA Service Pack 4.05".
Step 4: Click "Next" to proceed and the screen will show "Install",
"Uninstall" or "Enable/Disable Ultra DMA for IDE Driver".
Select "Install" and then click on "Next".
Step 5: The setup program will show the following on the screen:
"To complete this installation, follow this steps"
1. Select the "SCSI Adapters" icon on the "Control Panel".
2. Select the "Add.." button on the "Drivers" sheet.
3. Select the "VIA Bus Master IDE Drivers" and click the
"OK" button
4. Reboot
Please click "Next" to exit the setup program.
Step 6: Follow the steps shown in Step 5 to finish the VIA Chipset
Drivers installation.
NT 4.0
®
®
NT 4.0 Service Pack 3 or the latest version before
4-6
VIA CHIPSET DRIVER
Advertisement
Table of Contents
