Video Off After - MSI MS-5187 User Manual

Power Management
User Define
Min Saving
Max Saving
PM Control by APM
No
Yes
Note :Enable this for O.S. with APM like Windows
etc.
Video Off Method
Blank Screen
V/H SYN C+Blank
DPMS (default)
Note: Green monitors detect the V/H SYNC signals to turn off its electron
gun.

Video Off After

The settings are N/A, Standby, Doze, or Suspend. This option is for
choosing the setting in which the monitor will turn off.
N/A
Doze
Standby
Suspend
The default setting is Standby.
Users can configure their own power
management.
Pre-defined timer values are used such
that all timers are in their MAX value.
Pre-defined timer values are used such
that all timers are in their MIN value.
System BIOS will ignore APM when
power managing the system.
System BIOS will wait for APM's
prompt before it enter any PM mode
The system BIOS will only blank off
the screen when disabling video.
In addition to (1), BIOS will also turn
off the V-SYNC & H-SYNC signals
from VGA card to monitor.
This function is enabled only for VGA
card supporting DPMS.
Always turn on.
During Doze mode, the monitor will be turned off.
During Standby mode, the monitor will be turned off.
During Suspend mode, the monitor will be turned off.
3-18
®
® ®
95/98, Windows NT,