Mounting The Device; Mounting Instructions - Siemens SIMATIC IPC227G Operating Instructions Manual

Installing and connecting the device

3.2 Mounting the device

3.2 Mounting the device
3.2.1

Mounting instructions

Note
If the equipment is used in a manner not specified by the manufacture, the protection
provided by the equipment might be impaired.
Note the following:
• The device is approved for indoor operation only.
• When the device is used in the area of Industrial Control Equipment in accordance with
UL61010-2-201, the device is classified as "Open equipment". Open equipment must be
installed within an enclosure which protects you from hazards, including mechanical
hazards, electrical shock and spread of fire.
• Install the device only as one of the described permitted mounting positions.
• For installation of control cabinet, observe the country-specific regulations.
• All the external circuit of the device must be safe extra low voltage (SELV) circuit.
• This device is designed for use in a normal industrial environment. Without additional
protective measures (such as the provision of clean air), SIMATIC Box PCs may not be
operated in harsh environments that are subject to caustic vapors or gases.
24
Operating Instructions, 06/2021, A5E50059933-AA
SIMATIC IPC227G