Mounting The Device With Mounting Clips (Single-Touch Device) - Siemens SIMATIC IPC477E Operating Instructions Manual

3.2.2

Mounting the device with mounting clips (single-touch device)

Types of mounting clips and mounting brackets
You can mount the device as follows:
• With 12 mounting clips, steel (included in the product package)
• With 6 mounting clips (available as accessory for devices with resistive single-touch
screen)
Positions of the mounting clips
To achieve the degree of protection for the device, the positions for the mounting clips
shown below must be adhered to.
The positions of the mounting clips are marked by stamps on the cutouts. Fit the mounting
clips in all the stamped cutouts.
Requirement
• All packaging components and protective films have been removed from the device.
• To install the device, you need the mounting clips from the accessory kit.
• The mounting seal on the front of the device is not managed.
SIMATIC IPC477E
Operating Instructions, 11/2020, A5E37455003-AF
Mounting and connecting the device
3.2 Mounting the device
35