Table of Contents
Advertisement
USE AND CONTROL
The Controls of Your Unit
POWER
To turn the appliance on/off, press and hold the
key for 5 seconds.
NOTE: Pressing the
the audible alarm when the alarm is on.
UP
To increase (warm) the set temperature by 1° C or
1ºF.
DOWN
To decrease (cool) the set temperature by 1° C or
1ºF.
LIGHT
Used to turn the inner light on/off.
Display
Display the digital temperature and service
indicators.
is for UPPER/LEFT temperature zone and
for LOWER/RIGHT temperature zone.
Indicator Light
The indicator light is located at the right lower
corner of the display. The indicator light will be on
when the multi-key function is selected. To
perform the multi-key function, press and hold the
first key, then press the rest key for at least 5
seconds and then release all the keys.
ºF/ºC Selector
Select
the
temperature
Fahrenheit or Celsius degree. To change the
temperature from Fahrenheit to Celsius or from
Celsius to Fahrenheit, press and hold the LIGHT
key for 5 seconds.
Key Lock (Optional)
If in 2 minutes or longer without touching any key,
the key lock will be activated automatically. To
remove the lock, press the UP and DOWN keys at
the same time for at least 5 seconds and the
indicator light will flash three times to confirm the
action.
Setting the Temperature Control
The unit has two separate temperature zones.
•
The temperature of both zones can be set
between 5ºC and 22ºC (41ºF and 72ºF). The
LOWER/RIGHT temperature zone is ideal for
storing white and red wine at a setting of
13° C
to
22° C
UPPER/LEFT temperature zone is suitable
key once can switch off
display
setting
(55° F
to
72° F).
The
for storing champagne and white wine at a
setting of 5° C to 13° C (41°F to 55°F).
When the unit is plugged in for the first time, the
•
unit will power up automatically to the preset
defaults. The preset temperature at the factory
for UPPER/LEFT temperature zone is 10ºC
(50ºF) and for LOWER/RIGHT temperature
zone is 16ºC (60ºF).
You can press the left side UP and DOWN keys
•
to control the internal temperature of the
UPPER/LEFT temperature zone and press the
right side UP and DOWN keys to control the
internal temperature of the LOWER/RIGHT
temperature zone. When you press the two
keys at the first time, the display will show the
last temperature set previously.
NOTE:
LOWER/RIGHT temperature zone must always
be just as high or higher than that in the
UPPER/LEFT temperature zone. For optimal
performance, the set temperature of the two
zones should differ by at least 4° C.
The temperature that you desire to set will
•
increase 1ºC or 1ºF if you press the UP mark
once, on the contrary the temperature will
decrease 1ºC or 1ºF if you press the DOWN
is
mark once. The display flashes while you make
the setting.
After the temperature has been set, the display
•
shows the current inner temperature of the
particular temperature zone.
To view the set temperature at any time, press
•
the UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds.
Then the display shows the current inner
temperature again.
in
10
The
temperature
set
for
the
Advertisement
Table of Contents
