Panasonic TH-65SQ1W Operating Instructions Manual page 66

■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
■
[Current input]
Displays whether the input currently in use for viewing
is the (main) input set by switching input or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI1
HDMI2
DisplayPort
DVI-D
Backup
SLOT
DIGITAL
LINK
PC
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Main input
Backup OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Backup Input
HDMI2
66
English
Main
HDMI1
HDMI2
DIGITAL
DisplayPort
LINK
DVI-D
SLOT
○ ×
× ×
× ×
× ×
Full
Full
When the conditions for the Backup Input function
are met, the following screen is displayed.
1-2 [Input change mode]: [Normal] detailed
settings
Switches to the backup input if an interruption of
video occurs.
Note
● This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
■
[Primary backup input]
Sets the first priority backup input.
(None) / [HDMI1] / [HDMI2] / [DisplayPort] /
[DIGITAL LINK] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
PC USB
■
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI1] / [HDMI2] / [DisplayPort] /
[DIGITAL LINK] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
× ×
for viewing will be greyed out.
■
[Auto switch back mode]
Sets whether or not to automatically return to the
× ×
former (main) input when the former input video
initially viewed is restored while viewing the video
× ×
of the backup input enabled by the operation of the
× ×
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
Main input
Backup OK