Loading profiles
Load profiles and apply the picture adjustment values to
the display as follows.
1
In the [Picture] menu, select [Memory
load] with
and press <ENTER>.
Memory save
Memory load
Memory edit
2
Select the profile to load with
press <ENTER>.
Memory load
1. [
]
MEMORY1
2. [
]
MEMORY2
3. [
]
MEMORY3
Loading profiles using numeric buttons on the
remote control.
Each numeric button <1> ‒ <6> is allocated for
loading [MEMORY1] to [MEMORY6].
[Function button settings] (see page 84)
1
Press any of <1> ‒ <6>.
2
Select [Ok] with
<ENTER>.
Memory load
Load from "MEMORY2"
Ok
When profile is being loaded, profile name is
displayed.
Note
●
Loaded profiles are stored in memory according
to the selected input terminal.
and press
Cancel
PC
Full
Memory name: MEMORY2
Editing profiles
Delete or rename profiles as follows.
■
Deleting profiles
1
In the [Picture] menu, select [Memory
edit] with
Memory save
Memory load
Memory edit
and
2
Select [Memory delete] with
press <ENTER>.
Memory edit
Memory delete
Memory name change
3
Select the profile to delete with
and press <ENTER>.
Memory delete
1. [
]
MEMORY1
2. [
]
MEMORY2
3. [
]
MEMORY3
All delete
●
To delete all profiles, select [All delete].
4
Select [Ok] with
<ENTER>.
Memory delete
Delete the "MEMORY1" data
■
Renaming profiles
1
In the [Picture] menu, select [Memory
edit] with
Memory save
Memory load
Memory edit
2
Select [Memory name change] with
and press <ENTER>.
Memory edit
Memory delete
Memory name change
3
Select the profile to rename with
and press <ENTER>.
Memory name change
1. [
]
MEMORY1
2. [
]
MEMORY2
3. [
]
MEMORY3
and press <ENTER>.
and press
Ok
Cancel
and press <ENTER>.
and
53
English