Table of Contents
Advertisement
Item
[INITIALIZE]
[PROPERTY]
[LANGUAGE]
[I/F SETUP]
These are items for setting related to audio and video input/output and display, and setting battery, audio, video output, etc.
[OUTPUT SEL]
Item
[OUTPUT ITEM]
[SDI OUT1]
[SDI OUT1 MODE]
[SDI OUT1 CHAR]
[SDI OUT2]
[SDI OUT2 HDR]
[VIDEO OUT]
[SDI2/HDMI OUT]
[1080P SDI2/HDMI OUT]
[3G-SDI OUT]
[MONITOR OUT MODE]
Chapter 6 Menu Operations — Menu list
Deletes all loaded metadata and initializes.
Checks and corrects loaded metadata.
This item is enabled while the thumbnail is displayed.
Sets the language used to display metadata.
[ENGLISH], [JAPANESE]
f Factory setting: [JAPANESE]
This items is displayed when [NTSC (J)] is selected in [OPTION MENU] → [AREA SETTING].
Sets the character content to superimpose on the output signal of the <SDI OUT1> terminal and monitor
output terminal (<SDI OUT2>, <HDMI OUT>, and <VIDEO OUT>).
[MENU ONLY]: Displays only on the menu. Normally, nothing is displayed.
[TC]: Displays the time code. (Menu is displayed on the menu)
[STATUS]: Displays all items that are the same as the characters displayed on the viewfinder. (Menu is
displayed on the menu)
f Factory setting: [MENU ONLY]
The time code display position moves up and down based on the camera ID position.
Turns <SDI OUT1> terminal output [ON]/[OFF].
[ON]: Performs output.
[OFF]: Stops output.
f Factory setting: [ON]
Selects <SDI OUT1> terminal output signals.
[MEM]: In playback mode, these are playback images.
[CAM]: When the main menu → [SYSTEM] → [SYSTEM MODE] → [REC SIGNAL] is set to [CAM], output
is always camera images.
f Factory setting: [MEM]
Selects whether to superimpose characters on <SDI OUT1> terminal output images.
[ON]: Superimposes.
[OFF]: Does not superimpose.
f Factory setting: [OFF]
The content of characters to superimpose is the same as the characters superimposed on images output
from <SDI OUT2> and other terminals.
Turns <SDI OUT2> terminal output [ON]/[OFF].
[ON]: Performs output.
[OFF]: Stops output.
f Factory setting: [OFF]
Select high dynamic range/standard dynamic rage for the output of <SDI OUT2> terminal.
[ON]: Outputs in high dynamic range.
[OFF]: Outputs in standard dynamic range.
This is only enabled when the main menu → [PAINT] → [GAMMA] → [GAMMA MODE SEL] is set to
[HLG].
Turns <VIDEO OUT> terminal output [ON]/[OFF].
[ON]: Performs output.
[OFF]: Stops output.
f Factory setting: [OFF]
Selects the signal form to be output to the monitor output terminal (<SDI OUT2> or <HDMI OUT>) in HD
mode.
[SYSTEM MODE]: Outputs in the system mode signal format.
[DOWNCON]: Outputs the down converter signal.
f Factory setting: [SYSTEM MODE]
Selects whether to convert the output signal of the monitor output terminal (<SDI OUT2> or <HDMI OUT>)
to 1080i when in 1080P mode.
[1080P]: Outputs as 1080P.
[1080i]: Converts to 1080i and outputs.
f Factory setting: [1080P]
If the main menu → [I/F SETUP] → [OUTPUT SEL] → [SDI2/HDMI OUT] is set to [DOWNCON], the signal
that was down-converted is output, regardless of these settings.
Selects 1080P signals of the HD SDI output in 1080P mode.
[LEVEL-A]: Selects the LEVEL-A method.
[LEVEL-B]: Selects the LEVEL-B DL method.
f Factory setting: [LEVEL-B]
Selects the output signals of the monitor output terminal (<SDI OUT2>, <HDMI OUT> or <VIDEO OUT2>).
Operates independently of the <SDI OUT1> terminal.
[MEM]: In playback mode, these are playback images.
[CAM]: When the main menu → [SYSTEM] → [SYSTEM MODE] → [REC SIGNAL] is set to [CAM], output
is always camera images.
f Factory setting: [MEM]
– 182 –
Description of settings
Description of settings
Advertisement
Table of Contents
