Normal And Variable Speed Playback - Panasonic AJ-PX5100G Operating Instructions Manual

Normal and variable speed playback

r Normal speed playback
Color playback images can be viewed on the viewfinder screen by pressing the <PLAY/PAUSE> button. Likewise, color playback images can be viewed
on a color video monitor connected to the <SDI OUT1> terminal and monitor output terminal (<SDI OUT2>, <HDMI OUT> and <VIDEO OUT>).
Playback can also be paused by pressing the <PLAY/PAUSE> button during playback.
r Fast-forward and fast-reverse playback
The <FF/)> and <%/REW> buttons provide 32x and 4x fast-forward and fast-reverse playback. Pressing these buttons during a stop and playback
fast-forwards and fast-reverses at 32x and 4x speed, respectively.
r Cueing clips
If the <FF/)> button is pressed with playback paused, the clip being played back is paused at the start point of the next clip (cued up state). If the
<%/REW> button is pressed with playback paused, the clip being played back is paused at the start point of the clip currently being played back (cued
up state).
@
NOTE
t When playing back or switching to the thumbnail screen immediately after removing or inserting the P2 card or the power is turned on, it may take time
to read the clip information. During this time, [UPDATING..] is displayed on the thumbnail screen.
t If a P2 card is inserted while another card is being played back, the clips on the inserted card cannot be played back. A P2 card inserted during
playback is recognized after playback ends.
t When playing back clips spread over multiple P2 cards at variable speed, audio might be instantaneously interrupted, though this is not a malfunction.
t To play back clips in the different system modes, match [LINE&FREQ] to the format of the clip in the main menu → [SYSTEM] → [SYSTEM MODE]
and set the camera again.
t Audio of CH5 to CH8 recorded on another device cannot be played back.
Chapter 5 Playback — Normal and variable speed playback
– 127 –