Chevrolet 2003 S10 Pickup Owner's Manual page 338

3. Insert the chisel end of Nofice: To help avoid vehicle damage, do
not
drive
the wheel wrench, on the vehicle before
the cable is restowed.
an angle, into the
hole in the rear
bumper.
4. Be sure the chisel end of the wheel wrench
connects into the hoist shaft.
5. Turn the wheel wrench counterclockwise to lower
the spare tire. Keep turning the wheel wrench until
the spare tire can be pulled out from under the
vehicle.
6. When the tire has been completely lowered, tilt the
retainer at the end of the cable and pull it through
the wheel opening.
7. Pull the tire out from under the vehicle.
If your vehicle is equipped with a compact spare
tire, it is stowed underneath the rear of your vehicle.
See Compact Spare Tire
on
page 5-85 for more
information about the compact spare.
8. Put the spare tire near the flat tire.
A
The tools you'll be using include the jack (A) and wheel
wrench
(B).
Your vehicle may also have an optional
hub cap removal tool.
5-75