Chevrolet 2002 Prizm Owner's Manual page 12

Rear Head Restraint Removal
To remove the rear head restraints, do the following:
1. Press the release button located under the right rear
side of the head restraint.
2. Lift the head restraint upward.
3. Secure the head restraints in the trunk using
-
the tie down straps located on each side of the
trunk floor.
To reinstall the rear head restraints, do the following:
1. Remove the head restraints from the trunk.
2. Press and hold the release button on the seatback
while inserting the head restraint.
3. Push the head restraint down. After releasing the
button, pull on the head restraint to make sure it is
locked in place.
1-6
Rear Folding Seatback (If Equipped)
If your vehicle is equipped with this feature, you can
fold either side of the seatback down in your vehicle for
more cargo space. On vehicles with a built
restraint system, only the driver's side rear passenger
seatback can be folded down. Make sure the front
seatback isn't reclined. If it is, the rear seatback won't
fold down all the way.
CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted won't provide the
protection needed in a crash. The person wearing
the belt could be seriously injured. After raising
the rear seatback, always check to be sure that
the safety belts are properly routed and attached,
and are not twisted.
-
in child