Turn And Lane-Change Signals - Chevrolet 2002 Malibu Owner's Manual

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D
-
Turn and Lane Change Signals
D
-
Headlamp High/Low
D
- -
Flash to Pass
For information on the exterior lamps,
see "Exterior Lamps" later in this section.
2-34
Beam Changer

Turn and Lane-Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow
you to signal a turn or a lane change.
To signal a turn, move the lever all the way up
or down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
A warning chime signal will come on if you have left
your turn signal on for more than 3/4 mile (1 km).
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and
other drivers won't see your turn signal.
An arrow on the instrument
panel cluster will flash in
the direction of the turn
or lane change.