Table of Contents
Advertisement
5. Fill the radiator with the proper DEX
coolant mixture, up to the base of the filler neck. See
"Engine Coolant" in the Index for more information
about the proper coolant mixture.
If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.
6. Rinse or wipe any spilled coolant from the engine
and the compartment.
7. If you have the 3800 V6 engine, replace the
3800 Series II V6 engine cover shield.
A. Remove the oil fill tube, with cap attached, from
B. Insert the catch tab on the cover shield under the
C. Place the hole in the cover shield over the hole in
R
-
COOL
8. Then fill the coolant recovery tank to the
COLD mark.
9. Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap off.
the valve cover.
bracket on the engine.
the valve cover. Install oil fill tube and cap by
twisting clockwise.
5-21
Advertisement
Chapters
Table of Contents
