Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D
-
Turn and Lane
Change Signals
D
-
Headlamp High/Low
D
-
-
Flash
to
Pass Feature
D
Cruise Control
For information on exterior lamps, see "Exterior
Lamps" later in this section.
Beam Changer
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow
you to signal a turn or a lane change.
To signal a turn, move the multifunction lever all the
way up or down. When the turn is finished, the lever
will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
If you signal a turn or a lane change and the arrows flash
faster than normal, a signal bulb may be burned out.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuses and check for burned
bulbs. See "Fuses and Circuit Breakers" in the Index.
An arrow on the instrument
panel cluster will flash in
the direction of the turn
or lane change.
-
out
2-43