Cleaning Glass Surfaces; Windshield And Wiper Blades - Chevrolet 2000 Prizm Owner's Manual

Cleaning the Built
-
Your built in child restraint may be cleaned with mild
soap and lukewarm water. Don't use household cleaners.
They may weaken the harness or damage plastic parts.
-
The built in child restraint pad is attached to the
child restraint cushion and seatback with fastener strips.
You can remove the pad, machine wash it in cold water
on a gentle cycle and tumble dry it on a low heat setting.
Never bleach or iron the pad, and don't dry clean it.
Care of Safety Belts and Built
Child Restraint Harness
Keep the safety belts and the built
harness clean and dry.
CAUTION:
Do not bleach or dye safety belts or the built
child restraint harness. If you do, they may be
severely weakened. In a crash, they might not be
able to provide adequate protection. Clean the
safety belts and the child restraint harness only
with mild soap and lukewarm water.
6-46
in Child Restraint
-
in
-
-
in child restraint
-
in

Cleaning Glass Surfaces

Glass should be cleaned often. GM Glass Cleaner or
a liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass.
(See "Appearance Care and Materials" in the Index.)
Don't use abrasive cleaners on glass, because they
may cause scratches. Avoid placing decals on the inside
rear window, since they may have to be scraped off later.
If abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
Cleaning the Outside of the

Windshield and Wiper Blades

If the windshield is not clear after using the windshield
washer, or if the wiper blade chatters when running, wax,
sap or other material may be on the blade or windshield.
Clean the outside of the windshield with GM Windshield
R
Cleaner, Bon Ami Powder (non
cleaning powder), GM Part No. 1050011. The windshield
is clean if beads do not form when you rinse it with water.
-
scratching glass