Manual Transaxle Fluid; When To Check; How To Check - Chevrolet 2000 Prizm Owner's Manual

Table of Contents

Advertisement

Manual Transaxle Fluid

When to Check

A good time to have it checked is when the engine oil is
changed. However, the fluid in your manual transaxle
doesn't require changing.

How to Check

Because this operation can be difficult, you may
choose to have this done at your Chevrolet dealership
service department.
If you do it yourself, be sure to follow all the
instructions here, or you could get a false reading.
NOTICE:
Too much or too little fluid can damage your
transaxle. Too much can mean that some of the
fluid could come out and fall on hot engine parts
or exhaust system parts, starting a fire. Be sure
to get an accurate reading if you check your
transaxle fluid.
6-20
Check the fluid level only when your engine is off, the
vehicle is parked on a level place and the transaxle is cool
enough for you to rest your fingers on the transaxle case.
Then, follow these steps:
1. Remove the filler plug.
2. Check that the lubricant level is up to the bottom of
the filler plug hole.
3. If the fluid level is good, install the plug and be sure
it is fully seated. If the fluid level is low, add more
fluid as described in the next steps.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents