Windshield Wiper Blade Replacement - Chevrolet 2000 Lumina Owner's Manual

Dome Lamp
1. Grasp the front and rear center of the dome lamp
cover at the same time. Then squeeze and pull
downward. (To help pry the sides loose, a
screwdriver may be used as an aid during
this procedure.)
2. Remove the old bulb from the small prongs
extending from the dome lamp base plate; hook the
new bulb onto the prongs.
3. To reinstall the dome lamp cover, center it over
the base plate, making sure both the cover and the
base plate line up properly. Snap the cover firmly
into place.
For any bulb changing procedure not listed in this
section, contact your dealer service department.

Windshield Wiper Blade Replacement

1. Turn on the wipers to the low wipe setting.
2. Turn off the ignition while the wipers are at the
outer positions of the wiper pattern. The blades are
more accessible for removal/replacement while in
this position.
6-37