Chevrolet 2000 Lumina Owner's Manual page 108

Floor Mats (Option)
View A
Installation
1. Move the driver's seat to its most rearward position.
2. Place the driver's side floor mat in the vehicle with
the rear of the mat against the left (outboard)
front edge of the seat track mounting bracket
(see view A).
3. Use a screwdriver to screw the locator post into the
vehicle's carpeting. Press down while turning to
allow the locator to pierce the floor carpet. The
locator will not screw down tightly, but will turn
freely when installed properly.
Usage
D
To remove the mat, pull up on the rear of the mat to
View B
unsnap it from the locator post (see view B).
D
To reinstall the mat, align the grommet in the mat
over the locator post and push down to snap the mat
into place (see view B).
2-41