Chevrolet 2000 Cavalier Owner's Manual page 280

Headlamps
1. To rmove the six plastic fasteners from the shield use
-
the flat head screwdriver to pull up the center of the
fastener. Be careful not to break the fasteners that
hold the shield in place.
6-34
2. Using a 13 mm socket, remove the 2 bolts from
the headlamp. Pull the headlamp assembly up
and toward the front of the vehicle to access the
bulb assembly.
When replacing the driver's side headlamp, twist the
-
bulb assembly one eighth of a turn counterclockwise
and remove it from the headlamp assembly.
When replacing the passenger's side headlamp, twist
the bulb assembly one
and remove it from the headlamp assembly.
-
eighth of a turn clockwise