Then, without shutting off the engine, follow these steps:
2. Push it back in all the way, wait three seconds and
then pull it back out again.
6-20
1. If you have a
-
three
speed
automatic
transaxle, the
handle on the
transaxle dipstick
is a red ring. Pull
out the dipstick and
wipe it with a clean
rag or paper towel.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross
on the dipstick.
3. Check both sides of
the dipstick, and
read the lowerlevel.
The fluid level
must be in the
-
cross
hatched area.
-
hatched area