Outdoor Electronic Controller Removal Procedure - Panasonic CS-HZ25WKE Service Manual

18.2 Outdoor Electronic Controller Removal Procedure

Caution! When handling electronic controller, be careful of electrostatic discharge.
1. Remove the 5 screws of the Top Plate. Lift up
the left side of the Top Plate first, then remove
the Top Plate.
Screws
Screw
2. Remove the 8 screws of the Cabinet Front Plate
complete.
Cabinet Front Plate complete
Screws
Screws
Screws
3. Remove the screw of the Terminal Board Cover.
4. Remove the Top Cover of the Control Board by
4 hooks.
Top Cover
Hooks
Control Board
Top Plate
Screws
Fig. 1
Screw
Fig. 2
Hooks
Terminal
Board
Cover
Screw
Fig. 3
5. Remove the Control Board as follows:
Remove 5 connectors from
electronic controller
Remove 2 connectors
from reactor
Remove earth wire
Remove the Terminal Cover
and 3 Terminal Compressor
Control Board
Electronic Controller
131
Fig. 4
Compressor
Fig. 5
Fig. 6
Remove 1 screw
Remove 2 screws