Panasonic CS-HZ25WKE Service Manual page 126

18.1.1.2 To Remove Electronic Controller
6. Detach the earth wire screw, terminal wire (Brown),
terminal wire (Grey), terminal wire (Black), terminal wire (White),
terminal wire (Red) and earth wire (Green).
Figure 4
3 Hooks (Top, left & right side)
Figure 3
10. Detach all connectors as labled from the
9. Pull out the electronic
controller halfway.
8. Remove screw to
remove terminal
board complete.
7. Remove the indicator complete then detach the
connectors CN-DISP and CN-RCV.
126
5. Remove the control board cover
by releasing the 3 hooks.
electronic controller. Then pull out
electronic controller gently.
AC303
CN-FM
Figure 5
CN-CNT
CN-TH
CN-STM2
CN-STM1
CN-STM3
CN-RMT
CN-WLAN