Step-Bumper Pad - Chevrolet 1996 Tahoe Owner's Manual

Step-Bumper Pad
If your vehicle has a rear step bumper, it may
be equipped with a rear step pad at the center
of the bumper.
If you will be using the
bumper to tow a trailer,
you must remove the
center cutout circle to
install the trailer ball.
You must also remove
both outer cutouts to attach
the trailer safety chains.
To remove the pad, lift the
edge of the pad from the
rear of the bumper and
swing it forward. When
the pad releases from
the bumper holes, lift
the pad off.
4-56