Chevrolet 1996 Tahoe Owner's Manual page 112

Hide thumbs Also See for 1996 Tahoe:
Table of Contents

Advertisement

To remove the shade from the vehicle, first let the shade
go all the way into the holder. Then, push the shade
holder toward the passenger side of the vehicle. Lift the
To put the shade in the vehicle, first make sure the shade
slot in the holder faces rearward with the round surface
facing down. Then, hold the shade at an angle and place
shade up on the driver's side, swing the shade rearward,
the shade holder tab into the slot in the passenger's side
and take it out of the vehicle.
trim panel. Move the other end of the shade forward and
hold it next to the driver's side trim panel slot.
Push the shade holder toward the passenger side of the
vehicle and place the tab in the driver's side trim panel
slot. Make sure the tab goes all the way in the slot.
Lightly pull on the shade holder to make sure it is secure.
Then, pull the shade to the desired position and secure the
shade posts in the appropriate retaining sockets.
2-49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1996 suburban

Table of Contents