Chevrolet 1995 Blazer Owner's Manual page 279

0
Be sure that the notches are locked by the bottom claws. Make sure that
all other claws are properly locked on both sides of the insert slots.
3
1. Claw in Notch
2. Correct Installation
3. Incorrect Installation
0
Put the blade assembly pivot in the wiper arm hook. Pull up until the
pivot locking tab locks in the hook slot.
Carefully lower the wiper arm and blade assembly onto the windshield.
Backglass Wiper Blade Replacement
See Windshield Wiper Blade Replacement in this section for instructions on
how to change the backglass wiper blade. (The backglass wiper blade will
not lock in
a
vertical position like the windshield wiper blade, so care
should be used when pulling it away from the vehicle.)
6-39