Table of Contents
Advertisement
Thermostat
Engine coolant temperature is controlled by a thermostat
in the engine coolant system. The thermostat stops the
flow of coolant through the radiator until the coolant
reaches
a
preset temperature.
When you replace your thermostat, an AC' thermostat
is recommended.
Power Steering Fluid
How To Check Power Steering Fluid
When the engine compartment is cool, unscrew the cap
and wipe the dipstick with a clean rag. Replace the cap
and completely tighten it. Then remove the cap again
and look at the fluid level
on
the dipstick.
The level should be at the H mark if the engine is warm,
or at the C mark if the engine is cold. Add enough fluid
to bring the level up to the mark.
A fluid loss in this system could indicate a problem.
Have the system inspected and repaired.
What to Add
Refer to the Maintenance Schedule
to
determine what
kind of fluid to use. See "Recommended Fluids and
Lubr' nts" in the Index.
I
NOTICE:
~~
When adding power steering fluid or making a
complete fluid change, always use the proper
fluid. Failure to use the proper fluid can cause
leaks and damage hoses and seals.
6-24
Advertisement
Table of Contents
